How to Fix iTechie A88 Android Tablet Computer unable to boot up and is stuck in boot logo.

iTechie A88 tablet stuck on boot logo - image by MZtech

“I couldn’t determine exactly what caused my Android Tablet to stuck in boot logo every time I turn it on. I haven’t installed any update or flashed its firmware.”

iTechie A88 Tablet (Black) - image by MZtech

Specifications:

• Model Name: iTechie A88
• Product Type: Wi-Fi Tablet Computer
• Screen Size: 7.0” ; 800 x 480 resolution ; 5-point capacitive touch screen
• Operating System: Android 4.2 Jelly Bean (upgradeable)
• Processor: AllWinner A13 1.0Ghz ARMv7
• RAM: 512MB
• Device Memory: 4.0 GB NAND Fast Flash
• Connectivity: Wi-Fi 802.11 b/g/n
• Camera: 0.3 MP front ; 2.0 MP back with flash
• Battery: 2000 mAh (milliampere-hour)

---

Hard Reset:
iTechie A88 recovery mode can be accessed by pressing altogether the power button, volume up (+) button and volume down (-) button. If you can access recovery options, all you have to do is select the reset to factory settings. It could fix “stuck in boot logo” issue.

“I tried accessing recovery mode but it boots directly and stops at logo again. If you are unable to access the recovery mode like me, you need to flash the stock firmware image to the device in order to fix it.”

Flashing Firmware:
Things you’ll need:

1. Firmware image file
2. LiveSuit v1.11 application for your flashing tool.

Download iTechie A88 firmware:
To make sure you download the correct firmware version for your Android tablet, check on the motherboard number /build number. Unlock download link below.

iTechie A88 motherboard build number - image by MZtech

Download TZX-713B V2.1 firmware image (514.6 MB)

How To Flash Firmware:

1. Run LiveSuit application and click yes on whether or not to enter upgrade guide.
2. Select General Upgrade Mode.
3. Select Yes on Whether to select new image file.
4. Browse and select the downloaded firmware image file.
5. Make sure your tablet is off before connecting to PC.
6. Connect tablet to Computer with USB (Universal Serial Bus) cord.
7. Press and hold Power button and volume up (+) button.
8. Release buttons once connection is detected by LiveSuit application.

LiveSuit application flashing firmware - image by MZtech

9. Flashing will start right away.
10. Flashing will take a couple of minutes. Secure your USB connection to make sure your tablet doesn’t disconnect while flashing to avoid error.
    

LiveSuit application flashing successful - image by MZtech

11. You will see a prompt if the flashing process finished successfully.
12. You can now boot your tablet by turning it on. (Note: first boot after flashing may take a little longer than usual.)
13. The default language is in Hindu. To change it to back to English, go to settings –> select Language & input (letter A icon) –> select the very first option in the selection on the right side –> scroll down to find English and select it. ( change also the input language of your keyboard).

Your iTechie A88 Android tablet’s “stuck on boot logo” issue is successfully fixed.
Did this solution helped you? Please let me know by providing your feedback below. If you find this post helpful, don't forget to hit like or share buttons.

If you’re looking for Oppo Joy Plus (R1011) stock firmware / stock ROM, download link is provided below and learn how to use these downloaded file.

Oppo Joy Plus (R1011) - image by MZtech

 

Where Can You Use Oppo Joy Plus Stock Firmware?

• Fix Oppo Joy Plus phone that is stuck on boot logo.
  
• Factory reset
  
• Update firmware through recovery mode.
  
• Fix other performance issues on phone related to software.

How to Use Downloaded Firmware File?

• Flash it through recovery mode.
  
• Flash it using SP Flash Tool.

How to Flash Through Recovery Mode?

1. Download Oppo Joy Plus R1011 stock firmware / ROM .zip file.
   
2. Save the downloaded file in micro SD Card of your Oppo Joy Plus phone.
   
3. Enter recovery mode by turning off your phone, remove and re-insert battery, then pressing power button and volume up (+).
   
4. Select update from SD card then browse the saved firmware file in micro SD card and select it to start flashing.

How to Flash Using SP Flash Tool?

1. Download Oppo Joy Plus R1011 stock firmware / ROM .zip file.
   
2. Extract the downloaded .zip file.
   
3. Download SP Flash Tool.
   
4. Run SP Flash Tool and click on scatter file. (scatter file is located in the extracted .zip file of Oppo Joy Plus firmware)
   
5. Click on Download button, turn off your Oppo Joy Plus phone and connect to PC with USB (Universal Serial Bus) cord while pressing and holding volume up (+) button.
   
6. Wait until flashing is done and you will see an OK pop-up from SP Flash Tool.
   
7. Turn on your phone.

Download Oppo Joy Plus R1011 Firmware

R1011EX 11 A.07 - is the stock firmware update.

Oppo Joy Plus R1011 Firmware (847 MB)

Oppo Joy Plus R1011 firmware provided above is a stock firmware on a latest version – EX 11 A.07 and can be use to for updating firmware.
If you have some questions, feel free to post in the comment section below.

Invalid IMEI / NVRAM Error After Flashing With Stock Firmware

After Flashing a MediaTek Android device with its firmware using SP Flash Tool, one common issue we usually meet is having an invalid IMEI which makes our device unable to connect to cellular networks as well as Wi-Fi networks. To fix this, we should fix our IMEI number by manually entering the number to the device using MTK Droid Tool.

Invalid IMEI , No network connection - image by MZtech

Issue:

 

Android Tool created by Faheem Anjum is a very useful tool to repair problems in an Android Phone including Touch Screen issues.

Android Tools v1.1 by Faheem Anjum - image by MZtech

This Android Tool is created by Faheem Anjum is distributed freely for users who needs to repair their phones. In order to use this tool, you have to make sure that ADB (Android Device Bridge) USB (Universal Serial Bus) connection is enabled in your device.

You can do a lot of things using this Android Tool:

Check Device – in checking your device, you can get information of your device such as Model Number, Android Version, Build Number, CPU info, partitions info, and modules info.

Wipe Device – you can erase everything on your device and reset it back to its factory state.

Script Tools – you can download a dump copy of your device’s script, edit script, and inject it back. You can fix LCD positioning, Inverted Touch Screen, and Inverted Camera.

Fix Touch Screen – if your touchscreen isn’t working after flashing a ROM / firmware, this option is a great help to fix your Touch Screen to working state.

Android Tools Fix Touch Screen Feature - image by MZtech

 

Fix Camera – just the same as your touchscreen, if your camera isn’t working correctly after flashing, Camera Fixer will help you fix the issue.

Combo Fixer – is a collection of the Original Back Up Hardware driver such as LCD, Touch Screen, and Camera in a specific tablet model. This Combo Fixer can fix shifted LCD, Inverted Touch Screen, Inverted Camera in just 1 script injecting.

RockChip Tool – a tool to flash an Android device that has RockChip chip set.

MTK Auto Root – use this tool to root Android Device with MediaTek processor chip set.

Phoenix Suit – use this tool to flash an Android device with Spreadtrum processor chip set.

USB Driver – use this to install Android USB driver in your computer.

I have used this tool and it helped me in successfully fixing my Touch Screen issues in my Android Tablet after I have flashed a firmware.

If you want to try it out, all you need to do is download this application, install, and run this application as administrator in your PC.

You can download Faheem Anjum’s Android Tool v1.1 from the link below.

DOWNLOAD HERE

If you have tried this application, let me know what you think about it. And if you have some questions, feel free to post on comment section below.

Read this Blog:

A13 Android Tab - Touchscreen Not Working After Flash
How To Identify Firmware Of A Dead China Tablet PC

How to Remove Ghost Push Virus From Android Device

Ghost Push Virus - photo by MZtech

In removing Ghost Push Virus, you can try two things:

1. Flash your Android Device with its stock firmware.
2. Using CM security application with Stubborn Ghost Push Killer application.
   

Removing virus using CM security and Stubborn Ghost Push Killer Application.

• Perform a hard reset on your device by entering recovery mode and wiping all data on your phone.
• After reboot, go to settings -> Security. And make sure that you unchecked the - Allow Installation from Unknown Resources.
• Add a Google account and download and install from Google Play Store - CM Security and Stubborn Ghost Push Killer application.
• If you're having a hard time downloading and installing because of non-stop pop-up ads or there's an error in installing, disconnect from your device from Internet connection. Then manually download the application .apk file on your pc.

Download Stubborn Ghost Push Trojan Killer apk

DOWNLOAD CM Security apk

• Save the apk file on your device.Before installing, select first the allow installation from unknown resources in security settings, then Install the applications. Do not forget to uncheck it after you installed the two apps.
• If you have successfully installed the apps, click on scan (it will need Internet Connection).
• In some cases, your device needs to be rooted before the application could remove the virus totally. You can use any of these rooting tools to root your device:

Download iRoot Tool

Download SRS One Click Root Tool

Download KingRoot Tool

• If using the above tools couldn't successfully root your device, try downloading apk file and install it manually.

Downoad KingoRoot Apk

• Once rooted, open Stubborn Ghost Push Killer app on your device, and click scan.
• Open CM Security, click scan. Click options and select scan sd card / scan files.
• Scan and delete junk files and unused apk files.
• Reboot your device and you're done!

Is the steps above helped you remove Ghost Push Virus? Feel free to post in the comments if you have some questions.

 

Fix Or Factory Reset Your Lenovo A536 By Flashing Its Stock ROM / Firmware

Lenovo A536 Specification:

Year Released: 2014

SIM and Network: Dual MicroSim, GSM/HSPA

Size (Dimension): 5.50 x 2.83 x 0.39 in , weight - 148g

Screen: 5.0 in Multitouch Capacitive Touchscreen, 16M colors

Platform: Android O.S. 4.4.2 KitKat

Chipset: MediaTek MT6582M

CPU: Quad-Core 1.3Ghz Cortex A7

Memory: 8 GB Internal, 1 GB RAM, micro SD up to 32 GB 

Camera: 5 MP (Megapixel) auto-focus with LED flash, 2 MP Secondary Camera, 1080p Video Resolution

Battery: Li-Po (Lithium Polymer) 2000 mAh (milliampere-hour), up to 300 hours standby time, up to 12 hours talk time

• Wiping it back to factory settings doesn't work.
• Stuck at boot logo
• Phone won't start up / turn on.
• Forgotten pattern lock

 

How to flash Lenovo A536:

• Mediatek Drivers.

1. Extract downloaded Stock ROM zip file.
2. Extract SP Flash Tool.
3. Run SP Flash Tool. Click on scatter file and load the scatter file found in extracted ROM file.
4. Click on Download button.
5. Turn off your phone and connect to PC using USB (Universal Serial Bus) cord.
6. And wait for flashing to start by seeing the tab on SP Flash Tool loads with color red followed by color yellow. You will see a check mark pop up when it's done successfully.

Note:

 

Samsung Galaxy S4 (GT-i9505) Stuck At Boot Logo After Flashing Stock ROM in Odin

I flashed Samsung Galaxy S4 with stock ROM / firmware using Odin Flash Tool. Flashing was successful but it won't boot up past the Samsung Logo. I tried re-flashing it again but it is still the same.

Samsung Galaxy S4 - image by MZtech

How to fix Samsung S4 Stuck at Boot

1.) Thing you need before flashing:

ODIN Flash Tool. You can download Odin from HERE.

Stock firmware. You can download from Here.

GT-i9505 Pit File. Download. I have tested this file and it is working fine.

2.) Run Odin Flash Tool.

3.) Place your Pit File by clicking on the Pit tab.

4.) Extract your downloaded stock rom zip file and place it on PDA in ODIN.

5.) Put your phone in download mode and connect it to your PC with a USB cord.

     GT-i9505 Download Mode: Press and Hold Buttons: Volume Down, Menu, and Power.

6.) Click on Start. Once flashing is successful you will see a Pass displayed on your Odin and your device will reboot automatically.

7.) If you get stuck in the Samsung Boot Logo, remove the battery for at least a minute.

8.) Put back the battery in and put your phone in Recovery Mode.

     GT-i9505 Recovery Mode: Press and hold Buttons: Volume Up, Menu, and Power.

9.) Do a factory reset in recovery mode by scrolling using volume buttons and power button to select the wipe data and cache option.

10.) Once reset process is done, reboot your phone.

This process has fixed my phone. If you have questions, feel free to post a comment below. If you have tried the procedure above, I would be glad to hear from you.

Have you ever wanted to install commonly used Social Media Applications like Facebook, FB Messenger, Youtube, Skype, etc. on your device that runs with Android 2.3 (Gingerbread) Software?
Even tried to download it from Google Play Store only to be disappointed when it tell you that “this application is incompatible with your device”?

The applications you can see below are modified applications and have been tested by me personally to make sure it runs perfectly on devices with Android 2.3 Gingerbread OS.

YouTube

If you are unable to launch this application because it is asking for Google Play Services application (downloading it will eat a big space in your memory), Download this Google Play services application instead.

Skype

Opera Mini Beta

My Contacts

Camera 360